Assembly

We show an example assembly using the MT1/M linker with camera holder lip, the Head-plate holder 2, the MM33 micromanipulator and the probe holder.

Figure1
Figure2
:--:
Figure3
Head-holding system assembly

The head-plate is secured in the head-plate holder using 2 M2.5 screws. For this end, 2 M2.5 nuts are inserted into the head-plate holder.

Figure4
Head-plate holder nuts insertion

Finally, the assembly is secured to the ring-shaped instrument platform with M6 screws and connected to the rotary platform using RS6P/M posts.

Figure5
Head holding system and instrument ring assembly